Important Facts    
   
   

 



We have been producing, testing and supporting temperature loggers for many years.  Our new addition is the DataWatch Elite-DX series.


This unique instrument is unmatched by any product of its kind.  It is stable, holds its calibration longer than most devices and is very accurate.  The construction is solid, so you can expect years and years of reliable monitoring.


A large multi-functional LCD screen gives an immediate indication of the current temperature, alarm status, highest, lowest and average temperature readings as well as the battery condition.   


The DataWatch Elite-DX logger is an excellent choice where accuracy and dependability are key requirements.  Best of all, the data is reported into a superior data handling software: DataWatch Elite Plus.
 Ordering information for DataWatch Elite-DX Temperature Monitoring





 
 
1 2 3 

  Single Use Logger: $31.00
Product Code: DX-ST-S-8-L
Multi Use Logger: $49.00
Product Code: DX-IN-S-8-L
Multi Use Logger / External Probe: $68.00
Product Code: DX-OE-S-8-L
Multi Use Logger / External + Internal Probe: $76.00
Product Code: DX-1E-S-8-L
Multi Use Logger / 2 External Probes: $94.00
Product Code: DX-2E-S-8-L
  USB Cable + Software Disk: $7.00     
Product Code: CB-USB2-MINI5P
  Call us for quantity discounts: 704-827-4331

                             

DataWatch Elite-DX Temperature Logger

 

The DataWatch Elite temperature recorder measures and stores up to 8000 high resolution temperature readings over -40C to +80C (-40F to +176F) measurement ranges.

Using the DataWatch Elite USB Cable and Data Watch Elite Plus Software, you can control all aspects of performance, including delayed start, sampling interval, number of readings, continuous or fixed number of readings and configuration of conditions to activate the ALERT indicators.

Readings are downloaded using Data Watch Elite Plus Software.

The on-instrument display is an informative "extra" that permits a quick review of results in the current recording session.  Screens cycle automatically so that you can recover information without interfering with the operation of the unit...this can be important for situations where the unit is inside a case or enclosure designed to control the interior humidity level.

The DX Temperature Logger has a multifunctional LCD display with a refresh rate per second.

READY Unit is programmed and READY to start with START button
READY IN DELAY Unit is programmed with delay and will start after designated delay when push START button is detected
IN DELAY Unit is programmed with Date/Time, will start recording when Date/time is met
STOPPED Unit is not logging or has finished the last trip
Battery icon will appear when battery is low
HIGH ALARM Temperature went above HIGH alarm conditions
HIGH ALARM flashing Temperature went above HIGH HIGH alarm conditions
LOW ALARM Temperature went below LOW alarm conditions
LOW ALARM flashing Temperature went below LOW LOW alarm conditions
LATEST flashing Unit is logging
MARKED A bookmark is placed by pressing START button for 3-5 seconds while logging
HIGHEST|LOWEST|AVERAGE Highest, Lowest & Average will cycle on display when START button is pressed once
HOURS Time above/below specifications is displayed when START button is pressed twice
c Celsius
f Fahrenheit

 

Specifications  Product Sheet
Temperature Range  -40C to +80C  (-40F to +176F)             
Temperature Resolution  0.1C
Temperature Accuracy 0.5C (-40C to -10C) - 1F (-40F- to +14F)
0.3C (-10C to +80C) - 0.6F (+14F to +176F)
LCD Operating Range   -20C to +70C  (-4F to +158F)
Sensor Response Time T90 of 20 minutes in moving air
Stored Time-Temperature Readings 8,000 readings (time-temperature data points)
Time Accuracy       1 hour per year
Logging Interval Software adjustable: 5 sec to 17 hours
Battery Type and Life 3.0V, user replaceable CR2450 (Panasonic only)  1-2 years (depending on usage)
Case Dust and Water Resistance  IP65 (with plastic cap over USB connector)
Alarm Indicators Flashing LED lights : HIGH HIGH, HIGH, LOW, LOW LOW
Dimensions | Weight 83 x 57 x 17mm (3.4" x 2.3" x 0.7")  | 70 g  (2.5oz.)
Case Material Polycarbonate / ABS
Calibration

NIST Traceable upon request

Certifications ISO9001:2008, CE, RoHS 
Software DataWatch Elite Plus
Interface USB



Home | Contact | Cart | About 

 
Copyright 2013 Global Sensors. All Rights Reserved. SALES:
704-827-4331