Best in the Wet and the Heat
OK. Out there in the real world things are wet and wild. Here is an accurate and reliable thermometer that meets the challenge. You can even put it directly into a dishwasher to check temperatures there.
This economical thermistor-based digital thermometer has a cap for needle protection and has a very high accuracy. It has a hold button to “freeze” a measurement and is °F/°C switchable to fit all of your uses. Check dishwater temperatures with it by just reading the max memory after a dishwashing cycle.
No need to worry about calibration. The AQA4500 will retain its calibration. Using unique circuit designs that store calibration settings in non-volatile memory, field adjustment has become a thing of the past. This technological innovation allows us to guarantee the accuracy.
|Temperature Range||-40° to 450°F, -40° to 232°C|
|Operating Range||+32°F to +122°F (0 to +50°C) [unit range]|
|Accuracy Normal||± 1.8°F (1.0°C)|
|LCD Height||: 0.25″ / 6.35mm|
|Auto Off||after 10 minutes of non use|
|Calibration||Accurate for Life|
|Features||F/C Switchable | Max/Min | Temperature Memory | Hold Mode|
|Alarm||Adjustable Temperature Alarm|
|Response Time||<6 seconds|
|Certifications:||NSF, CE, WEEE, RoHS|
|Shaft Length||4.625″ / 11.75cm